Keep customers, staff and students safe with Simix

VCT with acrylic floor finish:

Hygiena Luminometer ATP reading on healthcare facility floor that was just cleaned with an autoscrubber and a competitor’s cleaner was 161. That means the floor is completely contaminated and needs to be immediately re-cleaned.

VCT floor with Simix High Shine Ceramic Coating:

Cleaned daily using an autoscrubber and Simix Multi-Surface Cleaner / Degreaser / Sanitizer.

After Simix:

ATP reading after cleaning and coating with Simix is 2. The CDC accepts ATP readings as an objective measurement of the cleanliness of surfaces. Anything less than 10 is considered sterile.

Beautiful VCT Floors with Less Work

These VCT tile floors were put into these classrooms sometime in the 1960s. Students have been walking across them and scraping desks and chairs across them for decades.

These results are possible with Simix Cleaner / Degreaser / Sanitizer and Simix High Shine Ceramic Coating.

Simix Cleaner / Degreaser / Sanitizer is proven to remove coronavirus

A new study done by Situ Biosciences Microbial Product Test Laboratory shows that Simix Cleaner / Degreaser / Sanitizer removes 99.9% of coronavirus and 99.7% of norovirus from non-porous surfaces like VCT tile.

LAB TESTS SHOW SIMIX REMOVES CORONAVIRUS

How to transition your VCT tile floor from acrylic floor finish to Simix High Shine Ceramic Coating

  • Step 1: Strip thoroughly with stripping solution and Simix.
  • Step 2: Rinse with 220 grit diamond pads, 800 grit diamond pads, and red pads.
  • Step 3: Apply 4 coats.
  • Step 4: Autoscrub with the 800 the next day.
  • Step 5: Apply 4 more coats.
  • Step 6: Wet polish with a 3000 diamond.
Surface preparation is the key to a successful transition. You have to completely rid the surface of acrylic floor finish and residue before coating.

High, Safe pH Keeps Customers, Staff, Students and Patients Healthy

Germs live and grow on surfaces that have a pH level between 4.8 and 9.2. While most cleaning and coating products are pH neutral, Simix Cleaner (pH 11.4) and Coatings (pH 12.3) create a permanent, safe, high pH that prevents the growth of germs and biofilm. With Simix, you can easily maintain a clean environment that does not support germ growth.